background image

26

RoHS declaration

in terms of the EU Regulation 2011/65/EU

Name and address of the manufacturer:
Zimmer GmbH

Im Salmenkopf
77866 Rheinau, Germany
+49 7844 9138 0

[email protected]
www.zimmer-group.com


We hereby declare that the incomplete machine described below

Product designation:

Fixed part

Type designation:

LWR50F series

conforms to the requirements of the directive in its design and the version we put on the market.

Michael Hoch

Rheinau, Germany, 2021-04-01

Authorized representative for the 

compilation of relevant technical 

documents

(Place and date of issuance)

Martin Zimmer

(Legally binding signature)

Managing Partner

REACH declaration

In terms of the EC Regulation 1907/2006

Name and address of the manufacturer:
Zimmer GmbH

Im Salmenkopf
77866 Rheinau, Germany
+49 7844 9138 0

[email protected]
www.zimmer-group.com


REACH stands for 

R

egistration, 

E

valuation, 

A

uthorisation and 

R

estriction of 

C

hemicals.

A full declaration of REACH can be obtained from the manufacturer due to the duty to notify in accordance with Art. 33 of 

the REACH regulation (“Duty to communicate information on substances in articles”).

Michael Hoch

Rheinau, Germany, 2021-04-01

Authorized representative for the 

compilation of relevant technical 

documents

(Place and date of issuance)

Martin Zimmer

(Legally binding signature)

Managing Partner

INSTALLATION AND OPERATION INSTRUCTIONS: 

LWR50F

DDOC01074 / b

EN / 2021-09-15

Zimmer GmbH • Im Salmenkopf 5 • 

 77866 Rheinau, Germany • 

 +49 7844 9138 0 • www.zimmer-group.com

Содержание LWR50F Series





























Отзывы: