13
6.4 Functional safety
For the overall safety of the function, all three components (stationary part, loose part with gripper and storage station) must
be taken into account.
The safety function that ensures secure locking between the stationary and loose part of the product is implemented via
two redundant action channels that consist of a mechanical locking and springs.
Technical supplementary safety measures (sensors) provide a high degree of diagnostic coverage. The product can thus
be classified into control category 3 in accordance with Chapter 6.2.6 of DIN EN ISO 13849-1. According to Figure 5,
Chapter 4.5.4 of the specified standard, the PL d can be achieved with this product.
Fault elimination in accordance with DIN EN ISO 13849-2, Annex A, Table A2 and A3 for the helical compression springs
used can be given.
6.5 Forces and torques
INFORMATION
►
You can find the information in the technical data sheet on our website.
►
Please contact Zimmer Customer Service if you have any questions.
7 Technical data
INFORMATION
►
You can find the information in the technical data sheet on our website.
This data varies within the series, depending on the specific design.
►
Please contact Zimmer Customer Service if you have any questions.
7.1
Electrical specifications
INFORMATION
►
You can find the information in the technical data sheet on our website.
This data varies within the series, depending on the specific design.
►
Please contact Zimmer Customer Service if you have any questions.
7.2 Protection class
NOTICE
The product achieves protection class IP40 in all mounted positions of installation.
INSTALLATION AND OPERATION INSTRUCTIONS:
LWR50F
DDOC01074 / b
EN / 2021-09-15
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Содержание LWR50F Series
Страница 2: ......
