INSTALLATION AND OPERATING INSTRUCTIONS:
Motor spindle, HF125-002 series
7
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
EN / 2020-11-25
DDOC00743 / -
3 Handling/Transport/Scope of delivery
3.1 Handling
DANGER
Injuries from suspended loads
Improper handling of suspended loads will cause serious injury or death!
Observe the following points:
Ö
Use suitable hoisting devices.
Ö
Wear appropriate personal protective equipment.
Ö
Always keep an adequate safety distance from suspended loads.
Ö
Never walk underneath a suspended load.
CAUTION
Material damage if unsuitable hoisting devices and attachment equipment are used
Unsuitable hoisting devices or attachment equipment may damage the product.
Ö
Do not use any chains or steel cables.
Ö
Use only tested lifting belts with sufficient load capacity.
3.2 Transportation data
CAUTION:
Improper transportation
Improper handling of the transportation box will cause transport damage to the product!
Ö
Do not tilt the transportation box.
Ö
Avoid powerful vibrations and impacts.
NOTICE:
Transportation temperature
During transport of the product, the temperature must not exceed or fall below the following range:
• - 10°C
•
+60°C
The product is delivered in a reusable transportation box.
Remove the packaging of the product only to the extent necessary for internal forwarding.
3.3 Scope of delivery
• Product
•
Installation and operating instructions
•
Maintenance plan (constituent part of the installation and operating instructions)
•
Transportation box
•
Supporting documents (see Section „Appendix“)
