INSTALLATION AND OPERATING INSTRUCTIONS:
Motor spindle, HF125-002 series
17
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
EN / 2020-11-25
DDOC00743 / -
9.5 Installing the electrical connections
DANGER:
Risk of fatal injury due to hazardous voltage!
As a general rule, the electrical connections must not be carrying voltage when they are installed!
Ö
All work on the electrical system must be performed when it is not carrying voltage!
CAUTION:
Malfunction and material damage due to improper installation of the electrical connections
Insert the electrical connections to the product securely!
Ö
During assembly of the electrical connections, it is important to ensure that the pins of the product's plug
contacts are properly oriented and are not damaged/bent.
Faulty connection of the grounding wire will cause a health hazard and material damage
Observe the measures for protection against electrical shock.
Ö
Connect product's ground conductor and the machine.
Ö
Personnel may work near the electrical components only if they are properly and sufficiently grounded!
►
Personnel are grounded by means of an ESD bracelet!
►
Personnel must wear ESD shoes or ESD shoe grounding strips!
NOTICE:
Non-compliance may result in material damage
In order to ground the product reliably, the ground conductor and the housing of the product must be
connected by means of a separate cable.
Ö
There must be
no
electrical connection between the housing of the product and the electrical connections!
Grounding the product is recommended if ESD sensitive parts come into contact with the product. Grounding is
also recommended in applications that require high EMC shielding.
