manualshive.com logo in svg

Zimmer GED5000IL Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Zimmer GED5000IL Series Скачать руководство пользователя страница 11

Zimmer GmbH 

•

 Am Glockenloch 2 

•

 77866 Rheinau, Germany 

•

 

 

+49 7844 9138 0 

• 

 +49 7844 9138 80 

•

 www.zimmer-group.com

11

INSTALLATION AND OPERATING IN-

STRUCTIONS:

GEP5000/GED5000 electric gripper series

EN / 05/01/2021

DDOC00211/i

6.1.3  LED display GEP/GED5000IL

INFORMATION

In the IO-Link variants, only the LED display has a function. None of the buttons have a function. All configu

-

rations of the functions and settings are made via the control system.
Please contact Zimmer Customer Service if you have any questions.

6.2 

Electrical specifications

INFORMATION

For electrical specifications, please refer to our website at 

www.zimmer-group.com

.

This data varies within the series, depending on the specific design.

Please contact Zimmer Customer Service if you have any questions.

6.3  Control

INFORMATION

For information on the control, please refer to our website at 

www.zimmer-group.com

.

Please contact Zimmer Customer Service if you have any questions.

6.4 

Verified configuration examples

INFORMATION

For information on verified configuration examples, please refer to our website at 

 

www.zimmer-group.com

.

• 

GEP5000IL series (technical data sheet)

• 

GED5000IL series (technical data sheet)

Please contact Zimmer Customer Service if you have any questions.

6.5  Self-locking mechanism

INFORMATION

The product has a mechanical self-locking mechanism to ensure that the workpiece remains held by the product 

in the event of power supply loss or failure (e.g. an emergency stop).

Please contact Zimmer Customer Service if you have any questions.

6.6  Protection class

NOTICE

The product achieves protection class IP40 in all mounted positions of installation.

6.7  Technical data

INFORMATION

For technical data, refer to our website at 

www.zimmer-group.com

.

This data varies within the series, depending on the specific design. 

Please contact Zimmer Customer Service if you have any questions.

Содержание GED5000IL Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды