36
A.T.S. 3000 AUTOMATIC TOURNIQUET SYSTEM
36
4c
5
Removing the Battery Continued
3) Disconnect battery at the cord plug connection.
4) Replace battery by removing Battery Clamp.
5) Make note of wire color to battery polarity.
6) Reverse the process to reassemble.
Removing the Rear Power Cord Clamp Cover
1) Remove the 4 #6 nuts holding the Cord / Pole Clamp
Cover.
6
7
Removing the Pole Clamp
1) Remove
the
two
(2)
Pole Clamp screws from the rear.
Disconnecting wiring from control board.
1) Use caution when disconnecting wiring from printed
circuit board headers.
2) Mark wires before disconnecting and see
Section 3.2 Table 3.1 for proper re-connect of Board
Plug Designators.
