ZNEO
®
Series of Microcontrollers Development Kit
QS005703-0908
Page 6 of 18
Windows XP
Follow the steps below to install the USB Smart Cable for Windows XP:
1. Connect the USB Smart Cable to the host PC for the first time.
The
Found New Hardware
wizard will activate automatically.
2. In the Wizard, select
Install from a list or specific location (Advanced);
then click
Next
.
If the Windows Logo testing dialog appears, select
Continue Anyway
.
3. Select
Search for the best driver in these locations
and
Include this location in
search.
4. Browse to one of the following driver directory:
<Zilog Developer Studio II Installation Directory>\
device drivers\USB
<Zilog Developer Studio II Installation CD>\Device Drivers\USB
5. Click
Next
, and then click
Next
again after the appropriate driver is found.
6. Click
Finish
to complete the installation.
Windows 2000
Follow the steps below to install the USB Smart Cable for Windows 2000:
1. Connect the USB Smart Cable to the host PC for the first time.
The
Found New Hardware
wizard should activate automatically.
2. In the Wizard, click
Next
.
3. Select
Search for a suitable driver for my device (Recommended);
then click
Next
.
4. Select
Specify a location
; then click
Next
.
5. Browse to one of the following driver directory:
<Zilog Developer Studio II Installation Directory>\
device drivers\USB
<Zilog Developer Studio II Installation CD>\Device Drivers\USB
6. Click
OK
, and then click
Next
after the appropriate driver is found.
7. Click
Finish
to complete the installation.
Note:
