Operating Manual
ZIGOR SOLAR XTR3
© ZIGOR
25
The numbers of the strings of the MPPT indicated in the previous figures correspond with the
following figure:
Fig. 5-7 MPPT strings
In order to change the MPPT configuration, it is realized of simple form from the menu of display,
goes to the menu “settings”, inside to the submenu “system”. In line 10 is the configuration of the
MPPT.
Remember, use the sa me type, the same number of pa nel and the same dire ction when it
does parallels of series of panels to connect into the same string.
5.
In this screen, the grid code has to be chosen. The screen will show different countries that are
saved in the database of the unit. Depends on the country selection, the inverter will charge
some voltage and frequency specific values. These values are defined by each country
standards. If your geographic place is not saved in the inverter’s database, please check with
ZIGOR customer service ([email protected]). If you don’t select a grid code, next time that the
inverter starts, this boot menu will appear again. As in previous cases, press confirmation key
and the right scroll button.
Country Displa
y’s number
Spain 1
UK 2
Portugal 3
France 4
Italy 5
Germany 6
Taiwan 7
Malaysia 8
India 9
China 10
Hong Kong
11
Fig. 5-8 Grid code
