Operating Manual
ZIGOR SOLAR XTR3
36
©
ZIGOR
6.1.12 Network menu
From this panel it is possible to modify all the parameters referent to the communication network.
Fig. 6-23 Network menu
From this screen it can be modified, for example, the IP of our unit or other factors of the network (DHCP
that have been mentioned before). It is the same menu that appears in the LCD screen.
6.2 Communications protocol
The inverter ZIGOR SOLAR XTR3 has the ability to communicate through the communication protocols
SNMP and Modbus (RTU, ASCII and TCP) by pin RJ45 Ethernet and 2 RJ11 jacks available to the
communications card as shown in figure:
Fig. 6-24 Terminales de comunicación
6.2.1 SNMP Communication Protocol
ZIGOR SOLAR XTR3 is allowed to communicate via Ethernet using SNMP protocol and can transmit
data from the equipment to be monitored at a remote location.
The objects defined in the MIB file is the set of system variables that the SNMP manager can ask the
agent. SNMP is accessed by both the variables of the system both for status and for configuration.
For more information on the SNMP protocol ZIGOR SOLAR XTR3 please see our communication´s
manual.
RJ11
RJ45
