4 ZIG-POE-AHTX USER MANUAL
Introduction
The ZIG-POE-AHTX is a 100-meter (328 feet) HDBaseT transmitter. The AHTX
has 3 inputs with auto-switching
– HDMI, VGA/Component and Composite. With
switchable POE it can be set up to power upstream and downstream HDBaseT
transmitters and receivers. The ZIG-POE-AHTX can be used stand-alone as an
HDBaseT transmitter, but really shines when paired with the ZIG-POE-RXAV
receiver/scaler & audio amplifier. A perfect “no-control” control system using “on-
connection” technology to fire up projectors, drop screens and control lighting in
small rooms
– BYOD and in seconds collaborate with your colleagues with full
audio and video in stunning 4K UHD. A must for conference rooms and huddle
spaces.
Package Contents
1 x ZIG-POE-AHTX
1 x User Manual
1 x IEC US Power Cord
Features
HDMI, VGA, CVBS inputs.
Auto-Switching function
– if you remove an active source – and another
source is connected then it will switch to the new source immediately.
IEEE POE
– Upstream or Downstream POE provider.
WebOS setup and control
– or control from ZIG-POE-RXAV hand-held
remote
– simple automation or integrate into 3
rd
party controller.
Supports HDMI 1.2, 1.3 and 1.4 with 48-bit deep color
Supports digital video formats up to Ultra HD 4K/2K, 60Hz, 4:2:0 pixel
format
Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS, Dolby
TrueHD, DTS HD-Master Audio and more.
Supports IR, RS-232 commands and has additional 3-12V IR locking
connection.
Supports HDCP 1.4 & 2.2
Duel use RJ-45 ports support HDBaseT and LAN/TCPIP
