zigencorp.com
Toll Free: 877-650-5252
International: +1 818-654-5252
Back Side
1. HDMI Input
– Connect HDMI cable here from your source (BlueRay,
Computer, etc.) up to 4K UHD.
2. VGA Input
– Connect VGA cable here from PC/MAC or use a breakout
cable to connect Component, RGBHV, or Y/C. DVD players, STB, etc.
3. CVBS Input
– connect legacy devices – VCR, document cameras, etc.
4. Audio Input
– 3.5MM stereo audio input jack. The audio going into this
jack follows the VGA/CVBS depending what is the active source.
5. HDBaseT output/LAN Port (fallback) connection
– Connect RJ45 up to
100 meters (328 feet) CAT5e, 6, 6a. This is the connection to an
HDBaseT receiver such as the ZIG-POE-RXAV, ZIG-PS-61 or ZIG-
POE-RX70 wall plate RX. You can also use this connection when
accessing via WebOS as a fallback method.
6. POE Switch
– 3-position switch.
a. Left
– POE-RX –
receives IEEE POE
from downstream
HDBaseT receivers like the ZIG-POE-RXAV or PS-61
– no local
power is required.
b. Center
– Off –
no POE is generated
. Requires local power
source.
c. Right
– POE-TX –
sends IEEE POE
to upstream HDBaseT
receivers like the ZIG-POE-RX70 and ZIG-POE-70R. Local
power source is required.
7. 5-Pin connecter
–
for IR connecting block
–
used for local control and
relayed to HDBaseT RX device.
• IR OUT +
• IR OUT –
• Ground
• + 12V
• IR IN 3-12V