13
alghamix II
en
the reference figures are present on pages 2, 3 and 4 of this manual and in the product Quick Guide
CHAPTER 1: INTRODUCTION
1.1
HOW TO READ AND USE THE USE AND MAINTENANCE
MANUAL
this “use and Maintenance Manual” provides information
regarding the installation, use and maintenance of the alghamix ii
mixer, manufactured by zhermack s.p.a.
- the alghamix ii mixer must be used in compliance with that
specified in the Manual: it is therefore recommended that the
manual is read carefully prior to installation and start-up. Make
sure that you read the entire manual and pay particular attention
to messages written in bold type or items highlighted by boxes
and/or symbols, which highlight dangerous situations or requiring
caution (see paragraph 1.2).
- the respect of standards and recommendations shown in this
Manual will ensure safe use of the machine and appropriate
interventions on the same.
- the use and Maintenance Manual is an integral part of the
machine: it should therefore be kept together with the machine
so that it can be consulted as and when necessary (in a secure dry
place away from sunlight, atmospheric agents, etc.) throughout
the working life of the alghamix ii mixer, even when the machine
is sold or finally dismantled.
- it is advised to keep the Manual constantly updated, integrating
any amendments, additions or modifications made by the
Manufacturer. any notes or comments should be made on the
blank pages at the rear of the Manual (see attachments: notes).
- use the Manual in a way that its content is not damaged.
- do not remove, tear or write on the Manual for any reason.
- if the Manual is lost or damaged and therefore becomes illegible
request a new Manual from the Manufacturer.
this use and Maintenance Manual is aimed at operators in order to
allow correct use of the alghamix ii mixer. the Manual contains all
useful information or declared used of the machine; in particular
the operator will find instructions and indications regarding:
• correct installation of the alghamix ii mixer;
• a functional description of the alghamix ii mixer and al parts;
• commissioning;
• correct programmed maintenance;
• attention to the most elementary safety and accident-prevention
regulations.
this Manual is divided into 9 chapters, each referring to a specific
subject inherent to the entire machine.
the attachments are found at the rear of the manual. they
complete the documentation.
1.2
TERMS AND SYMBOLS USED
it is fundamental that maximum attention is paid to the following
symbols and their meaning because they highlight important
information such as, critical situations, practical advice or
straightforward information.
Consult this page if in doubt regarding the meaning of the symbol
when reading the Manual.
• any operations carried out without compliance to instructions or
tampering with machine parts, which can cause serious injury to
persons, will be highlighted with:
danGer!
this symbol refers to safety standards that Must be
followed in order to guarantee your safety and that of
others and to prevent damage to the machine.
• Critical situations concerning dangerous areas, situations or
operations in which failure to comply with the instructions may
render the warranty null and void, cause damage to machine,
connected components or the surrounding area, are highlighted
by the symbol:
attention!
this symbol refers to safety standards that must be
followed carefully in order to guarantee your safety and
that of others and to prevent damage to the machine.
• any operations carried out without compliance to instructions
or tampering with machine parts, which can cause damage to the
machine rendering the warranty null and void, will be highlighted
with:
ProHibited!
this symbol calls attention to operations that are
prohibited.
• any general information and/or useful advice referring to any
subject, will be highlighted with:
note!
this symbol highlights information and/or useful advice.
CHAPTER 2: GENERAL INFORMATION
2.1
LIABILITY
failure to comply with the instructions contained in this use and
maintenance manual relieves the Manufacturer from any liability.
for any information not included or that cannot be deduced from
the Manual, consult the Manufacturer directly.
zhermack s.p.a.
Via bovazecchino, 100
45021 badia Polesine - ro - italy
tel. +39 0425 597 611, fax +39 0425 53 596
http://www.zhermack.com, e-mail: [email protected]
in particular, if machine maintenance is carried out in a way that
is not in compliance with the instructions supplied, or in a way to
jeopardise integrity or modify features, zhermack s.p.a. is relieved
from any liability inherent to safety of persons and faulty operation
of the machines.
2.2
WARRANTY: GENERAL STANDARDS
find the Warranty Certificate and the identification form attached
to this use and Maintenance Manual, which must be filled in
completely.
Generally the warranty is rendered null and void by the following:
• improper use of the machine;
• incorrect installation;
• negligence of envisioned maintenance;
• modifications or interventions not authorised by the Manufacturer
(especially on safety devices);
• use of non-original spare parts.
as of this moment zhermack s.p.a. is relieved from all
liability if any type of modification or tampering is made
on the machine without previous written authorisation
from the Manufacturer. Consequently, any repairs made
by unauthorised staff, use of non-original spare parts
or failure to comply with the installation standards
specified in this manual shall immediately render the
warranty null or void.
2.3
AUTHORISED STAFF
the staff in charge of the machine is divided into the following
categories:
operator - user
Person trained to use the machine. He performs all tasks necessary
for operation of the alghamix ii mixer, such as:
use, cleaning, inspection and simple interventions linked to normal
machine use.
the operator-user must operate with the machine mounted
according to that stated in this manual.
before using the machine or carrying out any intervention
on it, the operator must read the entire manual carefully.
this manual has been drawn up to provide the user
with essential information on rational, safe use of the
machine. the user must comply with the information
given at all times. the user must also use the worksheets,
attached to this manual, to keep a record of maintenance
interventions, component replacement as well as make
notes regarding anomalous functioning.
Maintenance technician authorised by zhermack s.p.a.
Person who operates in all operating conditions and at all safety
levels to perform repairs/ mechanical and electric adjustments,
periodic preventive maintenance and replacement of any
components.
2.4
GENERAL SAFETY PROVISIONS
the operator must comply with the advice and warnings given
below in order to ensure safe, long-lasting machine performance:
• do not allow untrained staff to use the machine;
• prepare an optimal worktop, making sure that the operational
