![background image](http://html1.mh-extra.com/html/zetron/30-worldpatch/30-worldpatch_instruction-manual_932239029.webp)
Section 4. Programming
4-9
A 1000 call Code Plan is programmed using only command “36#”. Code Plan
data is found in “Two-Tone Code Plans” on page 4-16. Command “37#” does not
apply to 1000 call two-tone paging.
Tone timing is programmed with command “38#”. The available timings are give
in “Two-Tone Timing” on page 4-14.
Group Calls are by default enabled. A diagonal tone may replace either the “A”
or “B” tone to disable group calls. Command “39#” is used for this operation.
36#
___#
(100 Call)“A” Tone - Tone Groups - 0 to 13
or (1000 Call) - Code Plans - 0 to 24
0
37#
___#
“B” Tone - Tone Groups 0 to 13
0
38#
___#
Set Two-Tone Timing (Range 0 to 7)
0
39#
___#
Group Call Operation
0 = Group Calls Enabled
1 = Diagonal Tone Replaces “A” Tone
2 = Diagonal Tone Replaces “B” Tone
0
DTMF Paging Parameters
When DTMF paging is enabled, the system must be programmed for the number
of capcode digits the caller must enter. This may be from 1 to 8 digits and does
not include the page type digit if both formats are enabled. The default for the
strapped digits is to be blank.
40#
___#
Number of DTMF Digits User Must Enter (1 to 8)
3
41#
______#
DTMF Strapped Digits (up to 5 digits maximum)
42#
___#
DTMF Strapped Digits Position
1 = Strapped Digits Precede Digits Entered
2 = Strapped Digits Follow Digits Entered
2
The system can be programmed to always send up to five digits in addition to
those the caller entered. These are called “Strapped” digits. Strapped Digits can
be sent either before or after the caller entered digits and are used to help build a
DTMF page. Commands “41#” and “42#” specify the strapped digits and their
placement. The DTMF paging speed is fixed at 8 digits per second.
Mobile-to-Mobile Paging
This command selects whether or not a mobile user can access the Model 30 to
have it selectively call another radio. When enabled, this feature requires the
mobile user add a steering digit to the end of the Connect Code. This indicates
whether a phone call or mobile-to-mobile call is being initiated. A “7” indicates a
mobile-to-mobile call, and a “9” indicates a mobile-to-phone.
Содержание 30 Worldpatch
