ZETRON 30 Worldpatch, Инструкция по эксплуатации

Страница: 24 / 60

Section 4. Programming
4-4
10# ___# Dial Regeneration Timeout Timer
(0 to 60 in seconds) 3
Hook Flash
The hook flash, when enabled, allows the mobile user to flash the telephone line.
To hook flash a phone line, the radio user must send a “*0” without letting
carrier drop between digits.
11# ___# Hook Flash (0 = Disabled, 1 = Enabled) 0
Call Waiting Alert
Normally, the Model 30 will not answer the phone line or attempt to process a
call while the channel is busy. Enabling the Call Alert feature allows the patch to
key up during a Mobile-to-Mobile call and send two quick beeps on the channel.
The mobile users may then elect to stop their conversation long enough for the
patch to process the incoming call.
13# ___# Call Alert (0 = Disabled, 1 = Enabled) 0
Limit Phone Access to Autodials
When enabled, this command prevents the mobile users from dialing any
numbers to the telephone directly. If they try to dial a complete phone number, or
access an Autodial position which is blank, the patch will terminate the call and
send out an error tone (warble) before unkeying. This feature gives the system
operator total control over the numbers that can be called by mobile users.
14# ___# Limit Phone Access to Autodials
(0 = Disabled, 1 = Enabled) 0
Toll Restrict Digits
These commands are provided to prevent the mobile users from dialing toll calls
on the Model 30. They can be programmed independently. The default for both
is blank.
15# ____# Restricted Numbers 1st Digit (1 to 4 digits)
16# ____# Restricted Numbers 2nd Digit (1 to 4 digits)
Ringout Mode
This command selects how the patch will process a call, once the phone line has
rung for the programmed number of Rings-to-Answer.