Program Controls and Displays
The following controls and displays are
used in PROGRAM Mode.
l
PRESET A AND PRESET B
There are 12 (24) PRESET A faders
which control individual channels 1 - 12
(1 - 24).
There are 12 (24) PRESET B faders
which control individual channels 1 - 12
(1 - 24), or channels 13 - 24 (25 - 48) if
WIDE is active.
l
CHANNEL FLASH BUTTONS
The 24 (48) CHANNEL FLASH buttons
located below the PRESET A and
PRESET B faders are used as memory
selection buttons in PROGRAM Mode.
l
A MASTER
The A MASTER fader is used to control
the maximum output level from the
PRESET A faders. If WIDE is active, the
A MASTER is used to control the
maximum output level from both the
PRESET A and PRESET B faders.
l
B MASTER
The B MASTER fader is used to control
the maximum output level from the
PRESET B faders. If WIDE is active, the
B MASTER has no effect.
l
PREVIEW/EDIT
When EDIT is active, the user can edit
individual channels of a previously
programmed SCENE memory, or the
memory numbers in a SEQUENCE. The
light in the button is illuminated when
EDIT is active.
l
DISPLAY
The DISPLAY indicates the current step
number when a sequence is being
programmed or edited.
l
SEQUENCE 1, SEQUENCE 2 and
SEQUENCE 3 BUTTONS
These buttons are used to select a
sequence to program or edit. Only one
sequence can be selected or active at a
time. The red light in the button is lit when
the sequence is selected or active.
l
CLEAR
The CLEAR button is used to clear a
scene memory or sequence. It is also
used to delete a step from a sequence.
l
STEP + and STEP -
These buttons are used to select the
required step when inserting, deleting or
editing steps in a sequence.
l
PROGRAM
The PROGRAM button is used to save
the output levels into the current scene
memory.
l
MEMORY PAGE
This button is used to toggle between the
two pages of memories. The red lights
above the button indicate which page is
currently selected.
Page 18
ELARA 73-710-00 Issue 3
Program Mode
Содержание Zero88
