Zero88 Zero88, Руководство пользователя

Страница: 27 / 40

ELARA 73-710-00 Issue 3
Page 25
Introduction
In RUN Mode the user can output a single
programmed memory or a combination of
memories.
The memories are accessed using the
MEMORY PAGE button and the PRESET
faders which are used as submasters.
The current page is indicated by the lights
next to the MEMORY PAGE button.
The PRESET A faders control memories
1 -12 (1 - 24), and the PRESET B faders
control memories 13 -24 (25 - 48). The
lights in the CHANNEL FLASH buttons
are illuminated if the corresponding
memory is programmed.
Programmed sequences can also be
output, using the SEQUENCE buttons.
Only one sequence can be active at a
time.
The output levels, crossfade time,
sequence speed and attack can be
adjusted using the various front panel
controls.
The final output levels of a scene memory
are determined by the programmed levels
in the memory, the appropriate PRESET
fader and the GRAND MASTER.
The final output levels of a sequence are
determined by the programmed levels in
the memory referenced by the current
step, the SEQUENCE MASTER and the
GRAND MASTER.
The desk outputs 512 channels of DMX
all the time.