Zero88 Zero88, Руководство пользователя

Страница: 19 / 40

ELARA 73-710-00 Issue 3
Page 17
Introduction
In Program Mode on the desk, both
SCENE memories and SEQUENCES can
be recorded.
A SCENE memory consists of a single
static state, recording the output level of
each desk channel.
A SEQUENCE consists of a number of
steps (maximum 99). Each step is a
previously programmed scene memory.
The same scene memory may be used in
more than one step of a sequence and
more than one sequence.
Memories and Sequences
The Elara desk provides 48 (96)
programmable memories, which are
accessed as two pages of 24 (48).
The MEMORY PAGE button is used to
select the required page. The CHANNEL
FLASH buttons are used to select the
memory. The yellow lights in the
CHANNEL FLASH buttons are use to
indicate the memories which have been
programmed.
The PRESET faders are used to set the
output levels and the PROGRAM button is
used to save the levels to a memory.
The desk also provides 3 programmable
sequences. The SEQUENCE buttons are
used to select the sequence, and the
MEMORY PAGE and CHANNEL FLASH
buttons used to program the required
memories into each step.