Zero UAV (Beijing) Intelligent Technology Co., Ltd. 21
(7)
When the words "Upgrade complete, please close this window!" appear, shutdown power to complete the upgrade
operation.
NOTE:
Contact Zero UAV sales or tech. support to provide the required firmware upgrade program if you are unable to download
it from the site.
If the software does not start upgrading when you apply power, close the program and re-connect the serial port to start
again.
8.3
ADJUSTING PARAMETERS
NOTE:
All parameter adjustments have been completed before any Z series gimbals leave the factory, they can be used
immediately. If you need to adjust any parameters you should first consult Zero UAV tech. or sales.
Improper parameter setting may lead to abnormal operation or even damage the gimbal.
