Zero UAV (Beijing) Intelligent Technology Co., Ltd. 11
Take out the peripherals of the camera(such as filter and hood),camera center of gravity need to be adjusted again by
customer if other peripherals need to be added.
Check the installation of battery ,memory card and focus; shutter speed need to be set to 1/120s,otherwise may lead to
jelly or jitter.
4.2
ADJUSTMENT OF CENTER OF GRAVITY
1. Before leaving the factory, the center of gravity of the Z1400 Gimbal is pre-adjusted for the Panasonic GH3 camera with
the Lumix G 14mm f/2.5 lens. Re-adjustment is required when changing camera or lens. If the camera or lens is not
changed, then there is no need to modify the mechanical structure or the installation mode of the gimbal. All that is needed
is to fix the camera.
2. The gimbal must be equipped with a camera load, and its center of gravity must be adjusted to the best position (the
camera should stop and remain static when deployed at any angle. Do not energize the gimbal under a no-load condition,
this would lead to the gimbal jittering, and might burn out the motors or the controller. A video tutorial demonstrating
camera adjustment can be seen at: http://v.youku.com/v_show/id_XODkwMjc5ODky.html