Zero UAV (Beijing) Intelligent Technology Co., Ltd. 14
CH6
position 1
Low speed
position 2
Mid range
position 3
Fast
NOTE: method to view remote controller channel: power on remote controller
→
MOL
→
SERVO.
Gimbal remote controller setting step
1.
Set a 3-position switch to CH5,controlling gimbal work mode; set a 3-position to CH6,adjusting gimbal revolving speed.
2.
Retractable landing gear control: If the signal wire of retractable control module is plugged in an empty channel of gimbal
receiver, then correspond channel is set into 2-position switch or knob switch, for controlling the retractable landing gear.
3.
CH8 is set to a 2-position switch, controlling the shooting and recording.
7
GIMBAL OPERATION
7.1
CHECK BEFORE OPERATION
1.
Check the installation of parts is accurate and the wiring firmly fastened.
