Zero Gimbal Z1400, Руководство пользователя

Страница: 10 / 32

Zero UAV (Beijing) Intelligent Technology Co., Ltd. 5
3 GIMBAL WIRING
Please carefully read and observe the following instructions before wiring the unit to avoid serious personal injury or
equipment damage.

All connections must be in strict accordance with the wiring diagram, otherwise the equipment will not perform normally
and may even be damaged.

Use a 6 cell (6S) Lithium Polymer (LIPO) battery to supply power to the gimbal.

The standard power supply module supplied, must be used to supply power to the gimbal controller and flight controller,
if not, the equipment may be burnt out.

When installing, please note that arrow printed on the gimbal must correspond to the forward direction of the aircraft. If
this form of installation is not possible, parameter regulating software may be used to change the deviation angle between
the forward direction of the gimbal and the aircraft head direction.