SAFETY INFORMATION
Thank you for purchasing our product. Please carefully read and observe the following safety information before using this
product. Our company assumes no liability or responsibility for equipment damage or for injury caused by ignoring the
following safety information.
Do not modify the gimbal or related structure. This may impact the function of the gimbal or in serious cases, destroy the
electronics.
Before leaving the factory, the center of gravity of the Gimbal Z1400 is adjusted for the Panasonic GH3 camera with a
Lumix G 14mm f/2.5 lens. If a different camera is used, it must be adjusted. If not, the gimbal does not need to be adjusted;
all that is necessary is that the camera be attached.
The gimbal must be operated with a load equivalent to a camera with its center of gravity regulated to the best position.
（
The camera should remain static and balanced when deployed at any angle. If the gimbal is not loaded it will shake
uncontrollably and may burn out the motors or electronics.
The Gimbal must be matched by a flight control system designed by our company and should be used and commissioned
in an open and safe site and in normal weather conditions.
