Zero 88 Lightmaster XL, Руководство пользователя

Страница: 27 / 30

Technical Specification
Standard Outputs
Analogue Output
0 to + 10 volts
Digital Output USITT DMX 512 to 1990 or
1986 spec
(user selectable).
MIDI Full implementation of
MIDI/MMA spec.
Mains Input
Power Supply
200 to 260 Vac 50 Hz
100 to 130 Vac 60 Hz
(Internally selectable), 20W
Audio
Input
Stereo; greater than 30mV,
Maximum 100V,
input impedance 22k
Ω
Physical Details
Operating
+5 to +40
°
C
Environment (non condensing)
Net Weight 7kg (15.4lbs)
Size 520 x 330 x 100mm
(20.5 x 13 x 4 inches)
/p26/3
To change the Mains Fuse
The position of the mains fuse in one of two fuse
clips in the Lightmaster XL is used to select 110V
or 240V operation.
To change the fuse or its position, Switch the
desk off and remove the mains plug, remove the
Memory Card, and carefully turn the desk upside
down. Unscrew the base panel (six screws, two
at each side and two at the rear), and remove.
The fuse is situated in the back corner of the
desk just behind the mains connector. Simply pull
off fuse cover, remove fuse and replace.
Reassemble the desk in the reverse order.
IMPORTANT:
The desk must have only ONE AntiSurge (T) fuse
fitted, in EITHER the 110V OR the 240V position.
For 200-260 V ac operation, the fuse must be
100mA AntiSurge (T).
For 100-130 V ac operation, the fuse must be
250mA AntiSurge (T).
DO NOT USE THE WRONG VALUE OR TYPE.
WARNING - Mains Supplies
If the Lightmaster XL’s memory is frequently
being corrupted, it is probably due to a “dirty”
mains supply. Zero 88 have designed a Mains
Conditioning Unit (Part No 00-140-00), which can
be installed to solve this problem and also
prevent high voltage spikes on the mains supply
causing damage.
Options and Accessories
00-299-00
Flight Case for Lightmaster XL
00-292-00 32kb Memory Card
This uses a BR2325 battery.
Which is easliy available from:
Radio Shack/Tandy
as their Cat No 23-168
00-293-00 Gooseneck Light
00-140-00 Mains Conditioning Unit (MCU)
This prevents very noisy mains supplies
from corrupting the Lightmaster XL
memories. Limited mains conditioning is
built into the desk as standard
Complementary Products
Alpha Pack
Freestanding, wall or stand mounting 3 channel x
6 Amp dimmer packs.
Betapack
Rack/Wall mounting dimmer pack with 6
channels x 10A
Betapack Plus
Rack/Wall mounting dimmer pack with 6
channels x 10A and Local Control
Rackmaster 260
6 channel x 10A high density dimmer pack
Demux 48
A 48 channel demultiplexor which will convert
DMX data to 0 to +5, +10, or +15v analogue
signals. A negative output kit is also available.
Technical Specification
Page 26
7359500/p26/3