Zero 88 Juggler, Руководство по эксплуатации

Страница: 7 / 16

Juggler 73-404-00 Issue 1 Page 7
Manual and Timed Fades
Crossfading between the scene set up on the preset faders and the stored scene is
achieved by moving the A MASTER and B MASTER faders in tandem.
If the FADE TIME control is set to Manual, the crossfade time is determined by the speed
at which the A MASTER and B MASTER faders are moved. The operator has direct
control over the speed of the scene change.
If the FADE TIME control is not set to manual, the crossfade time will be the time indicated
on the front panel of the desk. While a timed crossfade is in progress using the A and B
MASTER faders, the LEDs in the PRESET CONTROL button flash.
Flashing Channels
Use the FLASH button to select the required flash mode as follows:
When the LED in the FLASH button is off - the CHANNEL FLASH buttons are disabled.
When the LED in the FLASH button is on - the CHANNEL FLASH buttons will flash
channels 1-12.
When the LED in the FLASH button is flashing - the CHANNEL FLASH buttons will flash
channels 13-24.
Press and hold down an individual CHANNEL FLASH button. The channel is then added
to the scene at the level set on the GRAND MASTER.
Release the CHANNEL FLASH button. The channel returns to its previous level.