Zero 88 Juggler, Руководство по эксплуатации

Страница: 9 / 16

Juggler 73-404-00 Issue 1 Page 9
Editing Sequences
Hold down the SEQUENCE button for about two seconds to enter Program Mode. The
LED in the SEQUENCE button comes on.
Hold down the SHIFT button and use the UP and DOWN buttons to select the required
sequence number to edit. Release the SHIFT button. The seven segment display now
indicates the step number.
Use the UP and DOWN buttons to select the required step number.
To program a new step – Use the PRESET A and PRESET B faders to set up the
required output levels for the step. Press the SEQUENCE button to program the step.
To edit a programmed step – Use the PRESET A and PRESET B faders to set up the
required output levels for the step. Note that the PRESET CHANNEL faders must be
moved to their programmed levels before they become active. Press the SEQUENCE
button to re-program the step.
To clear a step – Hold down the SHIFT button and press the SEQUENCE button.
To clear all the steps in the sequence – Hold down the SHIFT button and press and
hold down the SEQUENCE button for about two seconds.
Notes – Programming and Editing Sequences
Any of the 12 programmable sequences can be selected by holding down the SHIFT
button and using the UP and DOWN buttons or by holding down the SHIFT button and
pressing one of the CHANNEL FLASH buttons.
Holding down the SHIFT button and pressing the UP and DOWN buttons together selects
sequence 1.
If the selected sequence is unprogrammed a dot is displayed after the sequence number.
Any of the 99 steps can be selected using the UP and DOWN buttons.
Pressing the UP and DOWN buttons together selects step 1.
If the selected step is unprogrammed a dot is displayed after the step number.
For unprogrammed steps, the PRESET CHANNEL faders are immediately active.
For programmed steps, the programmed levels are output and the PRESET CHANNEL
faders must be moved to their programmed levels before they become active.