Zero 88 Juggler, Руководство по эксплуатации

Страница: 12 / 16

Page 12 Juggler 73-404-00 Issue 1
Fade Time The FADE TIME control determines the crossfade time between the
presets A and B in Two Preset Mode or between the preset scene and
the stored scene in Wide Mode.
Fader A fader is used to control the intensity of a light. In addition to the
PRESET CHANNEL faders, the Juggler has faders to control the
overall output (GRAND MASTER), sequence output (SEQUENCE
MASTER), and the level of the A and B presets (A MASTER, B
MASTER). The faders on the Juggler can have any position from 0 to
100%. A fader is sometimes referred to as a Slider.
FCC Federal Communications Commission. The US equivalent of CE.
Flash Button The FLASH button determines the operation of the CHANNEL FLASH
buttons on the desk (disabled, channels 1-12 or channels 13-24).
Grand Master The GRAND MASTER fader controls the overall output of the desk.
HTP Highest Takes Precedence. The mixing method used on the Juggler.
The various brightness sources (A Preset, B Preset, Channel Flash
buttons and Sequence) are mixed on a HTP basis.
IEC320-C14 The type of mains input connector on the inline PSU, sometimes
shortened to simply IEC, or referred to as a kettle plug.
Intensity How bright a light is. Also known as Dimmer.
Key Another name for a Button.
Law The curve of the dimmer, which is normally set on the dimmer itself.
The Juggler does not allow you to control the fade law.
LED Light Emitting Diode. A small electrical component which emits light
when a current is passed through it in a particular direction. These are
used on certain Juggler buttons to indicate selections or presses.
Output A single desk channel, which is controlled by the Juggler.
Patch The Juggler desk has a fixed patch. Channels 1 - 24 are patched to
DMX output channels 1 – 24.
Pot A potentiometer, which can be turned to set various values in a given
range. The two Pots on the Juggler desk are the FADE TIME and
SEQUENCE SPEED controls.
Preset A Faders The PRESET A faders control the output levels of channels 1 – 12 in
association with the A MASTER and GRAND MASTER faders.
Preset B Faders The PRESET B faders control the output levels of channels 1 – 12
(two preset mode) or channels 13 – 24 (Wide Mode) in association
with the B MASTER and GRAND MASTER faders.
Preset Control The PRESET CONTROL button is only applicable in Wide Mode. The
PRESET CONTROL button and the accompanying LEDs are used to
control and indicate which master (A MASTER or B MASTER) has
control of the preset channel faders, and which master has control of
the ‘stored’ scene. While a timed crossfade is in progress the LED(s)
in the PRESET CONTROL button flash.