12
ZEPRESSO TREND INSTRUCTION MANUAL
13
ZEPRESSO TREND INSTRUCTION MANUAL
Preparing a Cold Beverage (120ml)
ATTENTION!
The appliance needs to cool down before preparing a cold beverage.
Unless the appliance is in Energy Save Mode, we recommend using the Cooling Function
before making your cold beverage. See the Cooling Function
(Page 14).
After a hot Beverage, use the Cooling Function
(Page 14)
before making your cold beverage.
ATTENTION:
If the light turns red then the Cooling Function has been activated.
Not the cold beverage function.
3.
Place an empty cup
under the dispenser (C).
4.
Pull down the dispenser
(C) if necessary.
5.
Push the cold beverage
button (3).
6.
The preparation will stop
automatically, once the
programmed volume is
reached. The appliance
will “beep” twice.
1.
Open the handle (A) and
correctly insert a capsule.
2.
Close the handle (A)
to load the capsule.
Preparing a Hot Beverage (50ml/120ml)
This process can be used to make either a 50ml or 120ml hot beverage. Please use the
appropriate cup size. Compatible with ZEPRESSO CAFE, ZEPRESSO TEA and MEDIZEP.
3.
Place an empty cup
under the dispenser (C).
4.
Pull down the dispenser
(C) if necessary.
5.
Depending on desired hot
beverage volume, push
either the hot beverage
button 50ml (1) or the hot
beverage button 120ml (2).
6.
The preparation will stop
automatically, once the
programmed volume is
reached. The appliance
will “beep” twice.
1.
Open the handle (A) and
correctly insert a capsule.
2.
Close the handle (A)
to load the capsule.
CAUTION:
Beware of hot water and steam! Risk of scalding!
ATTENTION:
If the process is delayed, the system is heating up to reach target temperature.
