ZS MK2
48
Testing and verification
www.zepro.com
Picture 72.
Testing and verification
Max 2º
Max. 15 mm
B
D
C
A
B
D
C
A
12
Testing and verification
Testing and verification of the tail lift takes place in accordance with the installation/delivery inspection.
Verify that the tail lift is suitable for the vehicle in question and for the intended use.
12.1 Static load test
12.1.1 Deformation
Position the tail lift half way to vehicle floor level and with the platform horizontal. Measure dimensions A-B-
C-D for comparison as illustrated.
Place a test load on the platform, as shown in table (for each lift model/lift capacity).
Remove the test load from the platform. Repeat the measurement of A-B-C-D and verify that there has been
no deformation of the lift or its fixing.
12.1.2 Operation
Place a test load on the platform, as shown in table. The tail lift must be at the same level and angle as the
vehicle floor. Leave the test load for 15 minutes. Verify that platform operation is not more than 15 mm in the
vertical direction (points A and D) and not more than 2° in the angular direction (points B and C), in relation to
the vehicle floor level.
Capacity
Load 1000 kg
Load 1500 kg
Distance out on platform (L)
1500 kg
1410 mm
940 mm
2000 kg
1875 mm
1250 mm
2500 kg
2360 mm
1570 mm
Static load (Test load 1.25 x tail lift loading capacity).
For tail lifts with load centre of 750 mm
Vehicle floor le
vel
Deformation
Operation
