ZS MK2
Connection of controller and warning lights
37
www.zepro.com
7.3
Connection
The connection of warning lights and the most commonly occurring controller (CD (Control Device)) models
is shown below.
Possible control device models vary depending on lift model, configuration and the market
concerned.
WL1 U7 U6 U5 U5 U4 U4 U3 U2 U1 U0
+
+
WL2
PA+
S5
S1+
S4
S3
S2
S1
S5+
S4+
S3+
S2+
PA-
CS
CS+
Down
2H
Out
Down
Down
C1+
C1+
Up
Tilt
In
C2+
Up
Tilt
C3+
Up
Ctrl 3
Ctrl 2
Ctrl 1
CD3
CD10
CD14
+
U1
U2
U3
U0
+
CD11
CD18*
CD9
B
C
E
Black
C1+
White
( ), if available)
Brown
Up (B)
Yellow
Down (E)
Blue
Tilt (C)
Green
In
Grey
Out
Black
C3+
White
( ), if available)
Brown
Up (B)
Yellow
Down (E)
Black
C3+
Brown
Up (B)
Yellow
Down (E)
Warning lights
Blue
WL1
Picture 51. Connection of controller and warning lights
Black (+)
White (-)
Brown
B
Yellow
E
Blue
C
Grey
Lock
* In some cases there may also
be a blue cable on the CD18.
It must NOT be connected in
this case.
m
WARNING!
Make sure that the control card is disconnected from the power before connecting. Connecting more
than one controller to each connection is not permitted. Risk of physical damage.
Black
C2+
White
( ), if available)
Brown
Up (B)
Yellow
Down (E)
Blue
Tilt (C)
