Zepro ZS MK2, Руководство по установке, Страница: 11 / 52

ZS MK2 Safety rules
11 www.zepro.com
3.2 Calculating the installation dimensions (Standard lift)
For easier installation it is useful to calculate and specify the necessary dimensions in advance. Efforts
should be made to install the lift as high as possible.
The platform and lift arm assembly are optimized for minimum overall length (O). Try to fit the slider profile in
such a position that when the platform is folded its rear edge aligns with the rear edge of the superstructure.
This makes sure the platform can be folded out.
The easiest way to calculated the installation dimensions is to use a CAD program. 2D drawings are available
for downloading from www.c-office.com. For help with calculating installation dimensions, contact ZEPRO.
Phone: +46 (0)10-459 05 04, Email: zeprotech@hiab.com.
Arm Lifting height Slide profile
(length)
B Platform (length) O
1565 1669
135
1356 1590 989* 1765 1769
1965 1869
1565 1789
155 1542 1700 1109* 1765 1889
1965 1989
1565 1910
170 1727 1850 1229* 1765 2010
1965 2110
* Valid with 50 mm bavetta. With a 70 mm bravetta, dimension (B) is reduced by 20 mm.
Length of slide profile
226 157
B
Total overhang (O)
226
Picture 9. Installation dimensions
46 157 36