Zepro Z3N 75-100, Инструкция по установке

Страница: 53 / 62

Z3N/Z3NU/Z3NN/Z3NNU/Z3NW/Z3NWU 75-100 Testing and verification
53 www.zepro.com
11.2 Dynamic load test
11.2.1 Test with max load
Place a test load on the platform according to the table for the respective tail lift model and lifting capacity.
Check that the lift operates correctly with loads in its normal range of movements, up, down, tilting at ground
level and tilting at vehicle floor level .
11.2.2 Test with owerload
Place a test load on the platform according to the table for the respective tail lift model and lifting capacity.
The test load should be 1.25 x the lift model’s max. load. Check that the lift gate cannot lift the load when the
up function is switched on (it may however by possible to tilt up the load).
11.2.3 Dynamic load (Test load 1.0 x tail lift loading capacity) For tail lifts with
load centre of 600 mm.
Capacity Load 500 kg Load 1000 kg
Distance out in platform (L)
450 kg 600 mm -
500 kg 600 mm -
700 kg 800 mm -
750 kg 900 mm -
1000 kg 1200 mm 600 mm
1500 kg 1800 mm 900 mm
2000 kg - 1200 mm
2500 kg - 1500 mm
Image 72. Testing and verification
Max 2º
Max 15 mm
B
D
C
A
B
D
C
A
Vehicle
floor level
Deformation
Drift