Zepro Z3N 75-100, Инструкция по установке

Страница: 7 / 62

Z3N/Z3NU/Z3NN/Z3NNU/Z3NW/Z3NWU 75-100 Important information
7 www.zepro.com
1.8 Repainting
Image 2. Piston rods, cyl-
inder covers and boots
Image 3. Hydraulic hoses
1.9 Battery maintenance
When storing for longer than 1 week, it is recommended to disconnect the lift from the battery via the main
switch or by releasing the lift’s main fuse, in order to reduce the risk of the battery discharging. The length of
time the vehicle can be stored without the battery charge level becoming too low depends on the condition of
the battery, the charge level prior to storage and how much power other components in the vehicle take from
the battery. After a period of storage, the battery must always be charged fully before operating the lift.
When the lift is operated repeatedly without starting or using the vehicle during lift installation or carrying out
service and repairs, use the battery charger between operations to maintain battery charge.
IMPORTANT
!
The battery charger must be disconnected when operating the lift. Risk of material damage.
IMPORTANT
!
Piston rods and cylinder covers must not be painted. Among other things, this can damage the cylinder gaskets.
Boots, hydraulic hoses and cables may not be coated/painted as the solvent in the paint can damage the hoses and cables and
impair durability.
Image 4. Cables