Z3N/Z3NU/Z3NN/Z3NNU/Z3NW/Z3NWU 75-100
20
Installation
www.zepro.com
4.3
Installation lift platform and
sealing strip
4.3.1
Lift platform
1. Check that all included components are clean,
clean where necessary.
2. Lubricate the metal bushings on the upper be-
aring of the arms. Make sure the small holes on
the inside of the bushings are filled with grease.
Use Zepro lubricant or equivalent.
NOTE!
Carefully lubricate the metal bushings on the
upper bearing of the arms. Make sure the small
holes are filled with grease. After installation of
the platform, the same bearings are also lubrica-
ted through the regular lubrication nipples, see
section
"9 Lubrication and fluid level check" on
page 46
3. Fit the platform to the arms and fasten the tilt
cylinders to the platform. Use the supplied shafts
and locking nuts.
Tightening torque: 25 Nm.
NOTE!
The tilt cylinders should be adjusted before fixing
to the platform.
Image 20. Fit the platform with the
shafts and locking nuts provided.
Содержание Z3N 75-100
Страница 2: ......