Zepro Z 15 Скачать руководство пользователя

Страница: 27 / 66

Operating standard lift, 3 b turn switch

Function, operation

TILTING UP

4+2+1

LIFT

4+1

OPERATING INSTRUCTION

The tail lift can only be used by authorized

personnel.

DO NOT OVERLOAD THE TAIL LIFT!

After operating the tail lift

Lock the platform, turn of the maneuver

current in the cabin. Then the tail lift is

locked for unauthorized people. If the

platforms lock handle (if available) goes

heavily, the reason can be hose break at

the lift or tilt system.

Note!

Certain models of control units are

equipped with electric heating. The electric

heating is connected to the control current.

This will consume a little current from the

battery if the control current is switched on.

Tilt up

Activate the turn switch (4) tilt button (2)

and up button (1) in mentioned order. The

platform tilts up. If the load is to heavy or

placed to far back on the platform at tilt up,

the overflow valve opens.

Lift

Activate the turn switch (4) and push up

button (1). If the load is to heavy the over

flow valve opens.

Close

Activate the turn switch (4) and push tilt (2)

and up (1). The platform tilts up and close

against the body.

CLOSE

4+2+1

NOTE!

Always lift up the platform

against body floor before tilt

up/closing to transport position.

NOTE!

The hydraulic system is

protected against overload

at lift and tilt up of a built in

overflow valve. Notice that this

valve doesn’t protect at resting

or lowering. This may under

no circumstances be used for

overloading at lowering.

NOTE!

The platforms movement can

stop at anytime (if the push

buttons are released) and in

all positions because the push

buttons break the current to

respective function.

Содержание Z 15



































































Результаты поиска

Содержание Z 15

Отзывы:

Похожие инструкции для Z 15

Бренды по названию

Популярные бренды

Zepro Z 15, Руководство пользователя

Результаты поиска

Содержание Z 15

Отзывы:

Похожие инструкции для Z 15

Бренды по названию

Популярные бренды