Zepro Z 15 Скачать руководство пользователя страница 35

Страница: 35 / 66

LOWER

Function, operation

Before loading/unloading

Fold out the ramps.

After loading/unloading

Fold in the ramps.

To transport position:

Slider in

Push button 5. The platform slides in.

Lift to transport position

Push up button 1. The platform lifts to

transport position.

SLIDER IN

LIFT

OPERATING INSTRUCTION

The tail lift can only be used by authorized

personnel.

DO NOT OVERLOAD THE TAIL LIFT!

After operating the tail lift

Lock the platform, turn of the maneuver

current in the cabin. Then the tail lift is

locked for unauthorized people. If the

platforms lock handle (if available) goes

heavily, the reason can be hose break at

the lift or tilt system.

Note!

Certain models of control units are

equipped with electric heating. The electric

heating is connected to the control current.

This will consume a little current from the

battery if the control current is switched on.

NOTE!

The hydraulic system is

protected against overload

at lift and tilt up of a built in

overflow valve. Notice that this

valve doesn’t protect at resting

or lowering. This may under

no circumstances be used for

overloading at lowering.

NOTE!

The platforms movement can

stop at anytime (if the push

buttons are released) and in

all positions because the push

buttons break the current to

respective function.

NOTE!

Always lift up the platform

against body floor before tilt

up/closing to transport position.

Operating slider SZF/SZFT

Содержание Z 15



































































Результаты поиска

Содержание Z 15

Отзывы:

Похожие инструкции для Z 15

Бренды по названию

Популярные бренды

Zepro Z 15, Руководство пользователя

Результаты поиска

Содержание Z 15

Отзывы:

Похожие инструкции для Z 15

Бренды по названию

Популярные бренды