Zepro Z 15, Руководство пользователя

Страница: 42 / 66

42
Note! Forklift locks can only be used on taillifts with steel platforms and loading
capacity 1500 - 2500kg.
If you install forklift locks, you can drive with a max 3,0 ton forklift including load
over the platform.
Lock the platform at bed level using the forklift locks. Secure the rear wheels.
If you unload the vehicle, tilt the platform down to compensate for changes in the bed
height, always make sure that the platform overlaps sufficiently (min 150 mm) and have
a secure and solid resting position.
Using the platform as a ramp for forklifts and
heavy pallet jacks
The platform can not withstand truck driving without special locks.
Special handling
If there has been an accident with the tail lift:
Don’t hide or ”hush-up” any accident. It can be dangerous for you or somebody else.
Contact your employer and tell what happened.
Contact authorized workshop if you suspect damages at your tail lift.
Before you use the lift again:
Make a test lift, preferably with max loads. Have a forklift in readiness under the platform
or make the test lift near the ground. Replace damaged parts and check for cracks or
damages on arms, platform and support frame.
If you have damaged your ZEPRO tail lift