Zepro Z 15 Скачать руководство пользователя

Страница: 31 / 66

Operating standard lift, 4 buttons

AUTOMATIC

TILTING UP

1+2

LIFT

1+2

OPERATING INSTRUCTION

The tail lift can only be used by authorized

personnel.

DO NOT OVERLOAD THE TAIL LIFT!

After operating the tail lift

Lock the platform, turn of the maneuver

current in the cabin. Then the tail lift is

locked for unauthorized people. If the

platforms lock handle (if available) goes

heavily, the reason can be hose break at

the lift or tilt system.

Note!

Certain models of control units are

equipped with electric heating. The electric

heating is connected to the control current.

This will consume a little current from the

battery if the control current is switched on.

Automatic Tilt up from the ground

Use buttons (1) and button (2). The

platform tilts up to horizontal level, then it

turns into normal lift function . If the load

is to heavy or placed to far back on the

platform at tilt up, the overflow valve opens.

Lift

Use buttons (1) and button (2). If the load

is to heavy the over flow valve opens.

Close

Use buttons (1) and button (4). The

platform tilts up and close against the body.

CLOSE

1+4

NOTE!

Always lift up the platform

against body floor before tilt

up/closing to transport position.

NOTE!

The hydraulic system is

protected against overload

at lift and tilt up of a built in

overflow valve. Notice that this

valve doesn’t protect at resting

or lowering. This may under

no circumstances be used for

overloading at lowering.

NOTE!

The platforms movement can

stop at anytime (if the push

buttons are released) and in

all positions because the push

buttons break the current to

respective function.

Function, operation

Содержание Z 15



































































Результаты поиска

Содержание Z 15

Отзывы:

Похожие инструкции для Z 15

Бренды по названию

Популярные бренды

Zepro Z 15, Руководство пользователя

Результаты поиска

Содержание Z 15

Отзывы:

Похожие инструкции для Z 15

Бренды по названию

Популярные бренды