ZEPIRO D2O VCP, Руководство по эксплуатации продукта, Страница: 35 / 40

D2O VCP Product Manual - 31
9.1 TECHNICAL SPECIFICATIONS
9.2 REGULATORY & RADIATION INFORMATION
The Zepiro D2O has the following approvals & listings:
• AS/NZS CISPR 32 : 2015 (EN55032) Class B and AS/NZS 2772.2: 2011 for RCM Labelling
NOTICE: This equipment complies with the ACMA Radio-communications (Electromagnetic Radiation -
Human Exposure) standard 2014 for General Public Exposure. A minimum of 9 centimetres separation
between the device and the user and all other persons should be maintained
WARNING: Changes or modifications to this device not expressly approved by Zepiro could void the
user’s authority to operate this equipment
ENVIRONMENTAL
Operating Temperature Range
-15 to +60°C (+5 to + 140°F)
Enclosure Ingress Protection (IP) Rating IP67 (Pending Testing)
POWER Nominal Operating Voltage 3.0 to 3.6VDC
Max System Standby Current 60µA (with Pulse Contact Open)
Nominal Non-Rechargeable Battery Capacity 10Ah
RADIO
FREQUENCY
Transmit Frequency (VHF) 161.45MHz
Receive Frequency (UHF) 400.575MHz
GNSS Receive Frequency 1571 to 1606MHz
SUPPLY
Device Supply 12V @ 25mA [Vs]
INPUTS
Input 1 0-5V or 0-10V (settings dependent)
Input 2 4-20mA (settings dependent)
Max Signal Input Voltage (Input 1) 12V
Max Current Input (Input 2) 30mA
Min Input Impedence (Input 1) 100k
Ω
Analogue Input Precision ±1% of R (±2 LSB)
Pulse Input with 30µA Bias Normally Open (NO) Contact
Pulse Max Signal Low Level 500mV
Pulse counter can be externally biased up to 5V
Pulse Signal Type Active Low Momentary
Pulse Length 3 to 100ms
Maximum pulses per hour 4,095
Maximum total pulse count before roll-over to zero 16,777,215
OUTPUT
Digital Output, Sw. to GND, 12V @ 500mA max Sink Only
SYSTEM
Device Internal Temperature Sensor Range -30 to +70°C (-22 to + 158°F)
MECHANICAL
Securing Fastener M5 Hex Head Grub Screw (2.5mm Key)
Enclosure Materials
ASA, PMMA, TPE