ZEPIRO D2O VCP, Руководство по эксплуатации продукта, Страница: 28 / 40

24 - D2O VCP Product Manual
COMMAND SYNTAX DETAILS
sys -P <password> <password>
Sets a new administrator password.
This is an Admin Restricted c ommand and cannot be set until the
admin
command has
been executed.
To minimise the risk of saving a password with a typing mistake, the parameter for
<password> must be entered twice, separated by a space. The password itself must be a
single, continuous string of characters with no spaces.
IMPORTANT NOTE: It is critical to remember the password as there is no mechanism for
Zepiro to reset the password in the event it is forgotten.
Example: Setting the administrator password to be
ab3Rq46
. OK message displayed when successful.
sys -P ab3Rq46 ab3Rq46
OK
COMMAND SYNTAX DETAILS
sys SC <1000 to 50000> <code>
Resets the battery capacity after replacement to allow for correct ongoing system power
estimates to occur.
The first parameter Requires battery pack capacity to be entered in milliamp hours (mAh) in
a range between 1000 mAh to 50000 mAh.
The second parameter is a special permissions code generated on request by Zepiro.
This process cannot be completed without a new factory supplied battery kit. Please
contact your Zepiro dealer for assistance.
Example: Setting the battery capacity to be 10,000 mAh and an example permissions code of
H42st5Pb
. OK message displayed when
successful.
sys SC 10000 H42st5Pb
OK