ZEPIRO D2O VCP, Руководство по эксплуатации продукта, Страница: 24 / 40

20 - D2O VCP Product Manual
COMMAND SYNTAX DETAILS
acq -m <mode>
Sets the mode of operation to define which input types will be sampled. Admin Restricted
acq -c <ch>
Sets the electrical type of the input channel to correspond to that of the connect input
device. Parameter at
<ch>
can be either:
10V
,
5V
or
20mA
. Admin Restricted
acq -t <hh>
Sets the Acquisition Synchronisation Time: Hour of Day (0 - 23) GMT. Admin Restricted
acq -p <1 to 255>
Sets the pre-scale applied to the writing of the counter in between the hourly readings - a
battery saving feature. Counter will only get updated after the number of pulses set by the
parameter (1 to 255). Default is
100
. Admin Restricted
Data Acquisition and Configuration Parameters
COMMAND SYNTAX DETAILS
msg -g
Displays the date and time (GMT) of the next satellite transmission opportunity
Satellite Network Parameters
COMMAND SYNTAX DETAILS
inp -a <on> <off>
Threshold setting to control the D2O’s digital output. Set as a percentage of the input’s
range (0 - 100%). Setting both parameters to
0
disables the feature. Admin Restricted
inp -s <1 to 3>
Smoothing applied to the input reading:
1
= Low,
2
= Medium,
3
= High. Admin Restricted
inp -v [F]
Displays the analogue input reading in either mV or µA (settings dependent). Entering
F
at
optional parameter [F] will force the device to take a new analogue input measurement
inp -p
Displays the current pulse counter reading
inp -z <confirm>
Resets the pulse counter to zero. Enter
CLEAR
at
<confirm>
to avoid accidental use.
Admin Restricted
inp -o <±20000>
Sets the analogue input electrical offset compensation in µV or µA (matched to the selected
input type). The parameter can be set between
-20000
to
20000
. Admin Restricted
VCP Input Parameters