12
Pump Maintenance
1
3
6
2
5
4
5
3
1
7
6
4
2
8
7
to step 16. If a proper fit is not obtained, remove the
female adapters from the offending cavity and reinstall
items per steps 8 through 15.
15. Install head per HEAD INSTALLATION.
Head Installation
1. Prepare pump head per instructions in PACKING
SERVICE.
2. Rotate the plungers so the outer plungers are
projecting the same distance from the crankcase.
3. Lubricate the exposed plungers with crankcase oil.
4. Start the head onto the plungers and, using a soft
mallet, tap the head evenly until it comes in contact
with the crankcase.
5. Start the cap screws through the head and into the
crankcase. Do not forget the lock washer on each
screw.
6. Tighten all cap screws by hand.
7. Torque the cap screws to the value indicated in the
TORQUE section of PUMP SPECIFICATIONS. Torque
the cap screws in the order listed below.
Содержание 212 CD
