background image

67

Deutsch

Español

Nederlands

GARANTIE-ZERTIFICAT

CERTIFICADO DE GARANTÍA

GARANTIEBEWIJS

Diese Maschine wurde mit den modernsten Produktionstechniken konzipiert 

und gebaut. Der Hersteller garantiert seine Produkte für einen Zeitraum 

von 24 Monaten ab dem Kaufdatum bei Privat- und Heimwerkereinsatz. 

Bei professionellem Gebrauch ist die Laufzeit der Garantie auf 12 Monate 

beschränkt.

Allgemeine Garantiebedingungen 

  1) Die Garantie gilt ab Kaufdatum. Die Herstellerfirma sorgt über ihr 

Verkaufs- und Kundendienstnetz für den kostenlosen Ersatz der Teile, 

die sich infolge Material-, Bearbeitungs- und Fabrikationsfehler als 

defekt erweisen. Durch die Garantie verliert der Käufer nicht die vom 

Bürgerlichen Gesetzbuch vorgesehenen gesetzlichen Rechte gegen die 

Folgen der von der der verkauften Sache verursachten Defekte oder 

Mängel. 

  2)  Soweit organisatorisch machbar greift das technische Personal so schnell 

wie möglich ein.

  3)  Bei Anforderung eines Garantieeingriffs muss dem befugten 

Personal der untenstehende, vom Verkäufer abgestempelte und 

vollständig ausgefüllte Garantieschein zusammen mit der Rechnung 

bzw. dem Kassenzettel zum Nachweis des Kaufdatums vorgelegt 

werden. 

  4)  In folgenden Fällen verfällt jeder Garantieanspruch: 

    - Bei offensichtlicher Unterlassung der Wartung,

    - Bei nicht korrekter Verwendung oder Veränderungen des Produkts,

    - Bei Benutzung von ungeeigneten Schmiermitteln oder Treibmitteln,

    - Bei Benutzung von nicht  originalen Zubehör- und Ersatzteilen

    - Nach Eingriffen, die von unbefugtem Personal durchgeführt wurden.

  5) Verbrauchsmaterial und die Teile, die einem normalen Verschleiß 

durch Betrieb ausgesetzt sind, werden vom Hersteller von der Garantie 

ausgeschlossen. 

  6) Von der Garantie ausgeschlossen sind Eingriffe zur Überholung und 

Verbesserung des Produkts.

  7) Die Garantie deckt nicht die während der Garantielaufzeit erforderlichen 

Einstellungen und Wartungseingriffe.

  8) Eventuelle Transportschäden müssen dem Spediteur unverzüglich  

gemeldet werden, ansonsten verfällt der Garantieanspruch.

  9)  Für die Motoren anderer Marken (Briggs & Stratton, Tecumseh, Kawasaki, 

Honda, usw.), die an unseren Maschinen installiert werden, gilt die vom 

Hersteller des Motors  gewährte Garantie.

10) Die Garantie deckt keine eventuellen direkten oder indirekten Personen- 

oder Sachschäden, die durch Defekte der Maschine oder deren 

anhaltender Nichtbenutzung  verursacht wurden.

Esta máquina ha sido proyectada y fabricada con las técnicas más modernas. 

El fabricante garantiza sus productos durante 24 meses desde la fecha de 

compra, siempre que el uso sea privado/aficionado. La garantía se limita a 12 

meses en caso de uso profesional.

Condiciones generales de garantía

  1)  La garantía es válida a partir de la fecha de compra. El Fabricante cambiará 

gratuitamente las piezas que presenten defectos en el material, el trabajo 

o la producción, mediante su red de venta y asistencia técnica. La garantía 

no anula los derechos legales del comprador, previstos por el código civil, 

contra las consecuencias de defectos o vicios provocados por el producto 

vendido.

  2)  El personal técnico efectuará las intervenciones lo antes posible y dentro 

de los plazos impuestos por exigencias de organización.

  3)  Para solicitar la asistencia en garantía, es necesario mostrar el 

certificado de garantía ilustrado a continuación, junto a la factura o 

el tique que demuestren la fecha de compra, al personal autorizado; 

asimismo, para que el certificado sea válido, se han de completar 

todas sus partes y ha de estar debidamente timbrado por el 

vendedor. 

  4)  La garantía pierde su validez en los siguientes casos:

    - Falta evidente de mantenimiento.

    - Uso incorrecto o manipulación del producto.

    - Uso de lubricantes o combustibles inadecuados.

    - Uso de piezas de recambio o accesorios no originales.

    - Intervenciones efectuadas por parte de personal no autorizado.

  5)  La garantía no incluye ni los materiales consumibles ni las piezas sujetas a 

un desgaste normal de funcionamiento. 

  6)  La garantía tampoco incluye las intervenciones de actualización o mejora 

del producto.

  7)  La puesta a punto o las intervenciones de mantenimiento eventualmente 

necesarias durante el periodo de garantía no están cubiertas por la 

garantía.

  8) Cualquier daño provocado durante el transporte tiene que ser señalado 

de inmediato al transportista bajo pena de anulación de la garantía.

  9)  Para los motores de otras marcas (Briggs & Stratton, Tecumseh, Kawasaki, 

Honda, etc.) montados en nuestras máquinas, será válida la garantía de 

los Fabricantes del motor.

10) La garantía no cubre los eventuales daños materiales o personales, 

directos o indirectos, provocados por averías de la máquina o por la 

interrupción forzada y prolongada del funcionamiento de la misma.

Deze machine is ontworpen en vervaardigd volgens de modernste 

productietechnieken. De fabrikant geeft een garantie van 24 maanden vanaf 

de aankoopdatum op de eigen producten voor privé-/hobbygebruik. De 

garantie is beperkt tot 12 maanden bij professioneel gebruik.

Algemene garantievoorwaarden 

  1) De garantie wordt toegekend vanaf de aankoopdatum. De fabrikant 

vervangt gratis de defecte onderdelen die te wijten zijn aan fouten van 

het materiaal, bewerkingen en productie middels het distributienet en de 

technische service. De garantie ontneemt de gebruiker niet de wettelijke 

rechten uit het burgerlijk wetboek tegen de gevolgen van defecten of 

onvolkomenheden die door het verkochte product veroorzaakt worden. 

  2)  Het technisch personeel grijpt zo snel mogelijk in binnen de tijdslimieten 

die uit organisatorisch oogpunt mogelijk zijn.

  3)  Voor het aanvragen van servicewerkzaamheden die onder de 

garantie vallen dient u het hieronder weergegeven garantiebewijs 

aan het bevoegde personeel te tonen. Het garantiebewijs moet een 

stempel van de verkoper dragen, geheel ingevuld zijn en begeleid 

worden door de factuur of de fiscaal verplichte kassabon met de 

aankoopdatum. 

  4)  De garantie vervalt bij: 

    - Overduidelijk gebrek aan onderhoud,

    - Onjuist gebruik van het product of sabotage,

    - Gebruik van ongeschikte smeermiddelen of brandstoffen,

    - Gebruik van niet originele vervangingsonderdelen of accessoires,

    - Werkzaamheden die verricht zijn door onbevoegd personeel.

  5) De verbruiksmaterialen en de onderdelen die onderhevig zijn aan 

normale slijtage vallen niet onder de garantie. 

  6) Bijwerkingen en verbeteringen van het product vallen niet onder de 

garantie.

  7)  De garantie dekt geen afstel- en onderhoudswerkzaamheden die tijdens 

de garantieperiode nodig mochten zijn.

  8) Eventuele beschadigingen die tijdens het transport zijn veroorzaakt 

moeten onmiddellijk aan de transporteur worden gemeld op straffe van 

verval van de garantie.

  9) Voor de motoren van andere merken (Briggs & Stratton, Tecumseh, 

Kawasaki, Honda, enz.) die op onze machines zijn gemonteerd geldt de 

garantie die door de fabrikant van de motor is gegeven.

10) De garantie dekt geen eventuele directe of indirecte beschadigingen die 

aan personen of voorwerpen worden aangericht als gevolg van defecten 

of langdurige inactiviteit van de machine.

MODELLE

DATUM

MODELO - MODEL

DATA - DATUM

SERIAL No

SERIAL No

VERKAUFER

DISTRIBUIDOR - VERKOPER

GEKAUFT VON Hrn.

COMPRADOR - GEKOCHT DOOR

Nicht einsenden! Der Garantieschein muss nur bei einer eventuellen Anforderung eines Garantieeingriffs vorgelegt werden.

¡No enviar! Adjuntar sólo a la eventual solicitud de garantía técnica.
Niet verzenden! Voeg dit bewijs uitsluitend bij het aanvraagformulier om technische garantiewerkzaamheden.

Содержание G3200









































































Отзывы: