Touch-MyDesign Plus
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com/
6
5 additional touch buttons
, which can operate as individual or joint controls.
Horizontal
or
vertical
orientation.
Light indicator (LED)
for every button, the state of which (on or off) can
depend on different factors according to the user’s needs.
Buzzer
for an audible acknowledgement of user actions (with the possibility of
disabling it either by parameter or by object).
Possibility of
locking / unlocking the touch panel
through binary orders or
scenes, and of setting a timed/automatic locking of the device.
Welcome Back object
(binary or scene), which will be sent to the bus on the
first touch of the button panel after a certain (parameterisable) standby period.
Two analogue/digital inputs
(for motion sensors, temperature probes,
additional switches, etc.).
Thermostat
function.
Built-in
temperature sensor.
1.2
INSTALLATION
Figure 2
Touch-MyDesign Plus. Installation Process.
To install the device, it is first necessary to mount the metallic plate into a square/round
standard appliance box through the suitable screws. Next, Touch-MyDesign Plus is
connected to the KNX bus through the corresponding terminal on the rear side of the
1
2
3
4
