Zennio ZVI-TMDP4, Руководство пользователя

Страница: 45 / 61

Touch-MyDesign Plus
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com/
45

Do not send unless all condition objects are 0: the welcome back object
will only be sent if all the condition objects are found to have the value “0”.

Do not send unless all condition objects are 1: the welcome back object
will only be sent if all the condition objects are found to have the value “1”.

Do not send unless at least one of the condition objects is 0: the welcome
back object will only be sent if at least one of the condition objects is found
to have the value “0”.

Do not send unless at least one of the condition objects is 1: the welcome
back object will only be sent if at least one of the condition objects is found
to have the value “1”.
Welcome Back Object (1 Bit) : checkbox to enable the sending of a 1-bit value
(through “ [General] Welcome Back Object: B ”) when the welcome back
function is triggered and the condition (if any) evaluates to true. The desired
value “B” (0 or 1) should to be entered in “ Value ”.
Welcome Back Object (Scene) : checkbox to enable the sending of a scene
run request (through “ [General] Scene: send ”) when the welcome back
function is triggered and the condition (if any) evaluates to true. The desired
scene number (1 through 64) should to be entered in “ Value ”.
Figure 31 General - Welcome Back Object - Custom Configuration.