Square TMD
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
34
Figure 29
Individual Button - Disabled.
Function
: sets the behaviour of the LED of the button. The options are
similar to those of the dedicated-object LED illumination available for other
control types: “0=Off; 1=On” and “0=On; 1=Off””.
Note
:
this parameter does not depend on the option selected for “LED
Illumination Control (All Buttons)” (see section 2.3.1).
After assigning this function to the button, object “
[Btn] [In] LED On/Off
” is
included in the project topology, so that the values that determine the state of
the LED at a given time can be received from the bus.
Switch
Figure 30
Individual Button - Switch.
Action
: sets the value to be sent to the bus (through object “
[Btn] [In]
Switch
“) when the user touches the button. The options are “Send 0”, “Send
1” and “Toggle 0/1”.
LED illumination control
: analogous to the homonymous parameter for the
“Disabled” function (see above). The options in this case are “Regular”, “State
dependent” and “Dedicated object”.
