Square TMD
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
21
Float constant.
Light dimmer.
Shutter.
Apart from the button function itself, the integrator can select the desired behaviour of
the button
LEDs
. The different
illumination modes
have been detailed in ANNEX I:
LED Illumination Modes.
The next sections explain the configuration involved for each of the above functions.
ETS PARAMETERISATION
Figure 19
Buttons - Configuration.
As stated in section 2.1, an independent tab for the parameterisation of the buttons is
shown in ETS by default, initially containing only a sub-tab named Configuration.
One drop-down list with the following options is shown per button:
Disabled. See section 2.3.2.
Pair X. Sets that this touch button will belong to a two-button control (where X
is A, B or C, depending on the model). Once one pair has been assigned to
