Square TMD
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
25
Figure 21
Buttons - Pair A.
Note
:
the INFO textboxes are functionless (they simply bring the option to add a
description to each button of the project) and can be hidden if desired. See section
2.2.5
.
The main parameter that needs to be configured is:
Function
: sets the desired function for the button pair: “Switch”, “Two objects
(short press / long press)”, “Dimmer” or “Shutter”.
Depending on the function, some more parameters are shown, as described next.
Please note that in the next pages the general notation “
[X]
” is used for the name of the
communication objects, as “X” depends on the button pair (A, B or C).
Switch
Figure 22
Pair Buttons – Switch.
Action
: assigns each of the two buttons the value to be sent through “
[Btn]
[PX] Switch
” (which has the Write flag enabled, so the state of the switch can
be updated from external devices). The options are “Left=0; Right=1” and
“Left=1; Right=0”.
Note
:
this parameter will remain hidden unless having selected “Every button
pair is configured separately” in Action of the pair buttons (see section
2.3.1)
.
LED illumination control
: sets the behaviour of the LEDs on the buttons.
The options are “Regular”, “State-dependent”, “State-dependent (both LEDs)”
and “Dedicated Object”.
