Zennio ZVI-SQTMD1, Руководство пользователя

Страница: 11 / 56

Square TMD
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
11
Figure 7 General – LED Brightness.
Normal Mode :

LEDs: OFF, brightness level : values between 0 (default) and 255.

LEDs: ON, brightness level : values between 0 and 255 (default).
Night Mode : in case of being this mode necessary, this checkbox needs to
be marked, which will incorporate some new parameters:

LEDs: OFF, brightness level : values between 0 and 255 (1 by default).

LEDs: ON, brightness level : values between 0 and 255 (8 by default).
In case of enabling the night mode, some more options can be configured:
Control object: 1 bit : when marked, it will be possible to switch the mode by
writing to a binary object (“ [General] LEDs & Disp - Brightness Mode ”). A
specific drop-down list will show up to select which value should trigger which
mode (“0 = Normal; 1 = Night” or “0 = Night; 1 = Normal”).
Control object: Scene : when marked, it will be possible to switch the mode
by writing a certain scene value to “ [General] Scene: Receive ”. Two specific
textboxes will show up to enter what scenes (1 through 64) will trigger each
mode.
Brightness Mode after ETS download : sets which of the two modes
(“Normal” or “Night”) will be active after an ETS Download.