MCC
http://www.zennio.com
Technical Support:
http://support.zennio.com
20
When selecting “Only one device” system configuration, the following parameters show
up (Figure 10):
Figure 10
General
– System Configuration: Only one device.
Operating Notification Time
[
1...
4
…255
]: sets the sending period of the
operating notifications, which indicate that the device is working.
In this case, the default communication objects are:
“
Operating Notification
”: one-bit object through which the above
notifications are periodically sent.
On the other hand, as shown in Figure 9,
thirteen checkboxes
(one per each
Hospitality thermostat) are provided to let the integrator select how many of the thirteen
thermostats are required. Additional entries to configure them will be included in the tab
menu on the left depending on the number of active thermostats.
3.2
HOSPITALITY THERMOSTAT
As described in previous sections, MCC includes
thirteen instances of the
Hospitality Thermostat
, which can be enabled and customised independently.
Please refer to the specific manual “
Hospitality Thermostat in MCC
” (available at the
Zennio homepage,
www.zennio.com
) for detailed information about the functionality
and the configuration of the involved parameters.
