PROJECTOR SETUP
PV152
1-9
PRO1200 PROJECTOR SETUP
Position of DIP switches and baud rate codes :
Baud Rate for communication with a computer
The communication speed between the projector and the
computer has 8 possible settings. With DIP Switch No. 6,
No.7 and No.8 of the 8 DIP switches on the controller board,
labelled as ‘Baud rate code (sum)’, it is possible to select the
baud rate (communication speed). Each DIP switch has its
own decimal value. The sum of the values associated to those
DIP switches gives the baud rate code. Each baud rate code
corresponds an communication speed.
1
2
3
4
5
6
7
8
OFF ON
0
1
Baud rate
DIP switches
4
2
1
Password mode
With DIP Switch No.5 of the second set of 8 DIP switches on
the controller board, the projector adjustments can be
protected with a password. When the password feature is
enabled, the user has to enter a password before he can enter
the adjustment mode (For more information about password
setting and reprogramming the password, see Installation
Adjustment).
When the password menus are disabled (adjust mode is
unprotected), the adjust mode can be selected by pressing
the
<ADJUST>
key. This position of the DIP switch is useful
for qualified service technicians because they do not need
a password to enter the adjust mode.
Position of DIP Switch No.5 :
ON : password mode enabled.
OFF : password mode disabled.
Factory preset password mode : OFF.
Factory preset baud rate = 9600
More information about computer communication with the
PRO 1200 is available in the Projector Control Software
manual.
Password
mode
1
2
3
4
5
6
7
8
OFF ON
0
1
Binary
Baud Rate Code
Speed
000
0
110
001
1
150
010
2
300
011
3
600
100
4
1200
101
5
2400
110
6
4800
111
7
9600
